Seasoning
Continuous Seasoning Machine
A continuous seasoning machine for applying dry seasoning to product moving from frying or cooling toward packing.

Equipment overview
Continuous Seasoning Machine
A continuous seasoning machine for applying dry seasoning to product moving from frying or cooling toward packing.
Typical process
Where this machine fits
- Continuous product feeding
- Seasoning dosing
- Controlled tumbling and distribution
- Discharge to inspection or packing
Product highlights
Configuration points that matter
- Product feed and seasoning dose should be interlocked where required.
- Drum angle, speed and residence time must be checked against coating uniformity and breakage.
Product flow, fragility, seasoning type, dosing accuracy, line speed, cleaning and packing connection
Buyer review points
The points that confirm the right model for this project.
Material condition
State the fried product arriving from the fryer, its size range and how much oil it still carries, because the seasoning has to bind onto that surface. Give the flavour format and the target coating weight, since a powder blend and a liquid glaze are dosed by different arrangements, and say how many flavours the machine has to hold.
Output basis
Give the hourly input and the finished seasoned output, and the target coating weight per unit. State the working hours, the campaign pattern and the flavour changeover time, because a changeover needs cleaning and dosing time that belongs in the shift figure rather than being absorbed silently.
Factory connection
The seasoning machine sits between the fryer and the packing line, so plan that straight run first. Check the floor area for the dosing head and the flavour hopper bank, and the extraction at the dosing point where fine powder is transferred. Confirm the power supply against the dosing equipment and leave access for a hopper exchange.
Acceptance method
Agree the test on one specified product and one seasoning setup: the incoming weight, the finished weight, the coating distribution across the product and the accepted variation in coating weight. Record the flavour batch used and the sample size in the same document, because coating weight is checked by weighing and needs a written tolerance.
Frequently asked questions
Questions to settle before selection
How is seasoning dose matched to continuous product flow?
Review product feed, seasoning dose and any required control interlock together. Test coating uniformity at the agreed line speed instead of treating the doser as a separate process.
What settings should be checked for fragile chips?
Check drum angle, speed and residence time with the actual product. Agree acceptable breakage and seasoning coverage through discharge and transfer to the next machine.
What information is needed for the packing connection?
Provide the product flow, discharge height, line speed and packing arrangement. Include cleaning and recipe-change requirements when agreeing the transfer and control scope.
Project boundary: Final model, output, dimensions, utilities, food-contact material scope, price, delivery and service boundary require technical and commercial confirmation before quotation.
Configuration request


