Washing & preparation

Spiral Brush Roller Peeling Machine

A brush-roller preparation machine for washing or surface peeling suitable root vegetables before cutting or further processing.

Spiral Brush Roller Peeling Machine for food processing
Equipment overview

Equipment overview

Spiral Brush Roller Peeling Machine

A brush-roller preparation machine for washing or surface peeling suitable root vegetables before cutting or further processing.

Ideal applicationsPotatoes and suitable root vegetables after material trials
Indicative capacitySized on incoming weight per hour and the peel loss accepted, with the dwell time in the figure.
Material specificationThe brush, the drum and the parts in contact with the product, plus the frame material, are listed in the approved technical specification.
Power / heatingNo heating in the brushing section; the rinse water supply and effluent route are confirmed separately.
VoltageMatched to the destination electrical standard after voltage, phase and frequency are confirmed, with the pump and the brush drive load listed separately.
DimensionsSet from the selected model and the approved layout drawing, with brush change access included.
Automation / optionsInfeed, brushing section, rinse and the discharge are configured by project, sized to the throughput.

Typical process

Where this machine fits

  1. Product feeding
  2. Brush-roller washing or peeling
  3. Spray rinse
  4. Discharge to inspection or cutting

Product highlights

Configuration points that matter

  • Brush hardness and residence time should be selected to limit unnecessary product damage.
  • The machine can connect to potato, vegetable or fresh-cut preparation lines.
Confirm before quotation

Product size, surface condition, peeling depth, brush stiffness, required output and wastewater arrangement

Buyer review points

The points that confirm the right model for this project.

Material condition

State the crop and its skin, because a soft skin and a hard skin need different brush pressure, different dwell time and different removal rates. Give the size range and whether the product is already washed, and how much skin loss the process accepts, since brushing removes a layer of the product surface as well as the skin.

Output basis

Give the hourly input and the peeled output per hour, and the peel loss accepted, because the brush load, dwell time and water flow all follow from the removal target. State the working hours and whether the line handles several crops in one shift, since a crop change means a different brush setting and a clean-down.

Factory connection

Water and effluent decide the layout here. Confirm the water supply and the volume available, and check where the effluent can go, because continuous brushing produces a large volume of it. Plan the flow from feed through brushing to the rinse and the discharge, and check the floor loading and the access for changing brushes.

Acceptance method

Agree the test on one specified crop and one brush setting: the skin remaining after peeling, the peel loss on the product surface, the damage rate and the surface appearance. Record the brush type and setting, the dwell time, the sample size and the number of samples in the same document, because removal is judged on the surface and needs a written reference.

Frequently asked questions

Questions to settle before selection

How are brush stiffness and peeling depth selected?

Review crop type, surface condition and the required peel removal. Confirm brush stiffness and residence time with samples while recording acceptable product loss and damage.

Can the same brush setup wash and peel every root vegetable?

Do not assume the same setting suits all crops. Provide the product-size range and whether washing or peeling is required, then agree the configuration for each intended use.

What needs to be planned after brush peeling?

Review spray rinsing, wastewater handling and discharge to inspection or cutting. Confirm the next-machine height and the acceptable product condition at the transfer point.

Project boundary: Final model, output, dimensions, utilities, food-contact material scope, price, delivery and service boundary require technical and commercial confirmation before quotation.

Line connection

Where this machine sits in the line

Move from peeling to the washing, cutting and packing stages.

Fruit & Vegetable Washing Line food processing equipment Related lineFruit & Vegetable Washing Line Automatic French Fries & Potato Chips Line food processing equipment Related lineAutomatic French Fries & Potato Chips Line Semi-Automatic French Fries & Potato Chips Line food processing equipment Related lineSemi-Automatic French Fries & Potato Chips Line

Configuration request

Check this machine against your material and output.

Request configuration